Increased Carbon Dioxide Absorption Rates in Carbonate Solutions by Surfactant Addition


Brett Spigarelli and Paul Hagadone

To meet the growing need for CO2 capture and storage technology, Michigan Technological University is researching CO2 capture and storage using carbonate solutions. The objective of the present study was to increase the absorption rate of CO2 into the carbonate solution without reducing the absorption capacity of the solution. This approach used a surfactant (a polypropylene glycol methyl ether (PPGME) surfactant called DOWFROTH 200) to chemically alter the gas bubble size. Experiments were conducted to study the absorption rate of CO2 at varying surfactant concentrations of 0, 0.12, 0.24, 0.36, and 0.48 g/L. Results showed that as the concentration of surfactant increased in solution, the absorption rate also increased. The CO2 absorption rate increased from 3.45 mmol/min CO2 at 0 g/L PPGME to 3.92 mmol/min CO2 at 0.48 g/L PPGME. This amounted to a 14% increase in the CO2 absorption rate with no decrease in absorption capacity of the solution.



Questions? Contact ASISC Staff, 906-487-3132

Michigan Technological University

Department of Chemical Engineering
1400 Townsend Drive, Houghton, Michigan 49931
Fax: 906-487-3213

This page was last modified on August 26th, 2013

Michigan Technological University is an equal opportunity educational institution / equal opportunity employer