Publications and Presentations

 

 

Theses

T. N. G. Adams, "In-Plane Thermal Conductivity Modeling of Carbon Filled Liquid Crystal Polymer Based Resins", M.S. thesis in Chemical Engineering, Michigan Technological University, December 2010.

T. M. Tambling, "Rheological Study on the Synergistic Effects of Multiple Carbon Filler Materials in a Liquid Crystal Polymer for Fuel Cell Bipolar Plate Applications", M.S. thesis in Chemical Engineering, Michigan Technological University, May 2008.

N. A. Janda, "Development of a Predictive Shielding Effectiveness Model for Carbon Fiber/Nylon Based Composites", M.S. thesis in Chemical Engineering, Michigan Technological University, August 2004.

J. A. Heiser, "Conductive, Shielding, Tensile, and Impact Properties of Carbon Filled Nylon 6,6 Based Resins", M.S. thesis in Chemical Engineering, Michigan Technological University, August 2003.

W. N. Yeo, "Electrochemical Applications of Carbon Foam Electrodes", M.S. thesis in Chemical Engineering, Michigan Technological University, May 2003.

A. S. Bhatia,  "Nickel Hydroxide Impregnated Carbon Foam Electrodes for Rechargeable Nickel Batteries", M.S. thesis in Chemical Engineering, Michigan Technological University, May 2003.

B. Wiljanen, "The Pavement Performance and Life Cycle Cost Impacts of Carbon Fiber Modified Hot Mix Asphalt", M.S. thesis in Civil Engineering, Michigan Technological University, May 2003.

Q. J. Krueger,  "Electromagnetic Interference and Radio Frequency Interference Shielding of Carbon-Filled Conductive Resins", M.S. thesis in Chemical Engineering, Michigan Technological University, May 2002.

K. S. Torrey, "Influence of Thermally Conductive Fillers on the Physical Properties of Waferboard", M.S. thesis in Chemical Engineering, Michigan Technological University, December 2001.

M. A. Cleven,  "Investigation of the Properties of Carbon Fiber Modified Asphalt Mixtures"; M.S. thesis in Civil Engineering, Michigan Technological University, 2000.

R. L. Fitzgerald, "Novel Applications of Carbon Fiber Hot Mix Asphalt Reinforcement and Carbon-Carbon Pre-Forms"; M.S. thesis in Chemical Engineering, Michigan Technological University, May 2000.

A. T. Apul, "Demonstrating the Functionality of Carbon Fiber as an Additive to Asphalt Pavement Crack Sealant Filler"; M.S. thesis in Civil Engineering, Michigan Technological University, 1999.

 

Dissertations

M. D. Via, "Investigation into the Enhancement of Polycarbonate with Conductive Nanomaterials", Ph.D. dissertation in Chemical Engineering, Michigan Technological University, May 2012.

R. L. Barton Carter, "Development and Modeling of Electrically Conductive Resins for Fuel Cell Bipolar Plate Applications", Ph.D. dissertation in Chemical Engineering, Michigan Technological University, August 2008.

R. A. Hauser, "Synergistic Effects and Modeling of Thermally Conductive Resins for Fuel Cell Bipolar Plate Applications", Ph.D. dissertation in Chemical Engineering, Michigan Technological University, May 2008.

M. G. Miller, "Development and Modeling of Thermally Conductive Resins for Fuel Cell Bipolar Plate Applications", Ph.D. dissertation in Chemical Engineering, Michigan Technological University, December 2006.

J. P. Konell, "Characterization and Tensile Modulus Modeling  of Conductive Resins", Ph.D. dissertation in Chemical Engineering, Michigan Technological University, December 2002.

M. L. Clingerman, "Development and Modeling of Electrically Conductive Composite Materials", Ph.D. dissertation in Chemical Engineering, Michigan Technological University, December 2001.

E. H. Weber, "Development and Modeling of Thermally Conductive Polymer/Carbon Composites", Ph.D. dissertation in Chemical Engineering, Michigan Technological University, December 2001.

 

Papers

J. A. King,  D. R. Klimek, I. Miskioglu, G. M. Odegard, “Mechanical Properties of Graphene Nanoplatelet/Epoxy Composites”, Journal of Applied Polymer Science, Vol. 128, No. 6, pp. 4217-4223, June 2013.

C. L. Heldt, A. K. Sieloff, J. P. Merillat, A. R. Minerick, J. A. King, W. F. Perger, H. Fukushima, J. Narendra, “Stacked Graphene Nanoplatelet Paper Sensor for Protein Detection", Sensors and Actuators B, Vol. 181, pp. 92-98, May 2013.

G. P. Moriarty, S. De, P. D. King, M. Via, J. A. King,  J. N. Coleman, J. C. Grunlan, “Thermoelectric Behavior of Organic Thin Film Nanocomposites”, Journal of Polymer Science Part B: Polymer Physics, Vol. 51, pp. 119-123, January 2013.

 J. A. King,  M. D. Via, F. A. Morrison, K. R. Wiese, E. A. Beach, M. J. Cieslinski, G. R. Bogucki, “Characterization of Exfoliated Graphite Nanoplatelet/Polycarbonate Composites: Electrical and Thermal Conductivity, and Tensile, Flexural, and Rheological Properties”, Journal of Composite Materials, Vol. 46, No. 9, pp. 1029-1039, May 2012.

1)    M. D. Via, J. A. King,  J. M. Keith, I. Miskioglu, M. J. Cieslinski, J. J. Anderson, G. R. Bogucki, “Tensile Modulus Modeling of Carbon Black/Polycarbonate, Carbon Nanotube/Polycarbonate, and Exfoliated Graphite Nanoplatelet/Polycarbonate Composites”, Journal of Applied Polymer Science,   Vol. 124, No. 3, pp. 2269-2277, May 2012.

1)    M. D. Via, F. A. Morrison,  J. A. King, E. A. Beach, K. R. Wiese, G. R. Bogucki, “Effects of Multiple Fillers on the Rheology of Polycarbonate- Based Composites”, Polymer Composites,   DOI 10.1002/pc.22149, Vol. 33, No. 2, pp. 306-316, February 2012.

J. A. King, M. D. Via, O. P. Mills, D. S. Alpers, J. W. Sutherland, G. R. Bogucki, “Effects of Multiple Fillers on the Electrical and Thermal Conductivity and Tensile and Flexural Modulus of Polycarbonate Based Resins", Journal of Composite Materials,  Vol. 46, No. 3, pp. 331-350, February 2012. 

M. D. Via, J. A. King, J. M. Keith, G. R. Bogucki, “Electrical Conductivity Modeling of Carbon Black/Polycarbonate, Carbon Nanotube/Polycarbonate, and Exfoliated Graphite Nanoplatelet/Polycarbonate Composites”, Journal of Applied Polymer Science,  Vol. 124, No. 1, pp. 182-189, April 2012. 

J. A. King,  M. D. Via, M. E. King, I. Miskioglu, G. R. Bogucki, “Electrical and Thermal Conductivity and Tensile and Flexural Properties: Comparison of Carbon Black/Polycarbonate and Carbon Nanotube/Polycarbonate Resins”, Journal of Applied Polymer Science,  Vol. 121, No. 4, pp. 2273-2281, August 15, 2011. 

 M. D. Via, F. A. Morrison, J. A. King,  J. A. Caspary,  O. P. Mills, G. R. Bogucki, “Comparison of Rheological Properties of Carbon Nanotube/Polycarbonate and Carbon Black/Polycarbonate Composites”, Journal of Applied Polymer Science,  Vol. 121, No. 2, pp. 1040-1051, July 15, 2011.

 T. N. G. Adams, T. R. Olson, J. A. King, J. A. Keith, “In-Plane Thermal Conductivity Modeling of Carbon Filled Liquid Crystal Polymer Based Resins”, Polymer Composites,   Vol. 32, No. 1, pp. 147-157, January 2011.

 J. A. King, M. D. Via, J. A. Caspary, M. L. Jubinski, I. Miskioglu, O. P. Mills, G. R. Bogucki, “Electrical and Thermal Conductivity and Tensile and Flexural Properties of Carbon Nanotube/Polycarbonate Resins”, Journal of Applied Polymer Science,   Vol. 118, No. 5, pp. 2512-2520, December 2010.

D. Lopez Gaxiola,  M. J. Jubinski, J. M. Keith, J. A. King, and I. Miskioglu, “Effects of Carbon Fillers on Tensile and Flexural Properties in Polypropylene–Based Resins”, Journal of Applied Polymer Science,  Vol. 118, pp. 1620-1633, November 2010.

D. Lopez Gaxiola,  J. M. Keith, N. Mo, J. A. King, B. A. Johnson, “Predicting Thermal Conductivity of Multiple Carbon Fillers in Polypropylene-Based Resins”, Journal of Composite Materials,  Vol. 45, NO. 12, pp. 1271-1284, June 2011.

J. A. King, D. Lopez Gaxiola, B.A. Johnson, and J. M. Keith, “Thermal Conductivity of Carbon Filled Polypropylene Based Resins”, Journal of Composite Materials,  Vol. 44, No. 7, pp. 839-855, April 2010.

D. Lopez Gaxiola,  J. M. Keith, J. A. King, and B.A. Johnson, “Nielsen Thermal Conductivity Model for Single Filler Carbon/Polypropylene Composites”, Journal of Applied Polymer Science,  Vol. 114, No. 5, pp. 3261-3267, December 1, 2009.

J. A. King, B.A. Johnson, M. D. Via, and C. J. Ciarkowski, “Effects of Carbon Fillers in Thermally Conductive Polypropylene Based Resins", Polymer Composites, Vol. 31, No. 3, pp. 497-506, March 2010.

J. A. King, B.A. Johnson, M. D. Via, and C. J. Ciarkowski, “Electrical Conductivity of Carbon Filled Polypropylene Based Resins”, Journal of Applied Polymer Science, Vol.  112, No. 1, pp. 425-433, April 5, 2009.

J. M. Keith, J. A. King, and B. A. Johnson, “Electrical Conductivity Modeling of Carbon Filled Polypropylene Based Resins for Fuel Cell Bipolar Plate Applications", Journal of New Materials for Electrochemical Systems, Vol. 11, No. 4, pp. 253-257, November 2008.

J. A. King, M. D. Via, J. M. Keith, and F. A. Morrison,  “Effects of Carbon Fillers on Rheology of Polypropylene Based Resins", Journal of Composite Materials, Vol. 43, No. 25, pp. 3073-3089, December 2009.

J. M. Keith, J. A. King, I. Miskioglu, and S. C. Roache, “Tensile Modulus Modeling of Carbon Filled Liquid Crystal Polymer Composites”, Polymer Composites, Vol. 30, No. 8, pp. 1166-1174, July 2009.

R. A. Hauser,  J. M. Keith, J. A. King, and J. L. Holdren, “Thermal Conductivity Models for Single and Multiple Filler Carbon/Liquid Crystal Polymer Composites”, Journal of Applied Polymer Science, Vol. 110, No. 5, pp. 2914-2923, December 2008.

R. L. Barton, J. M. Keith, and J. A. King, “Electrical Conductivity Modeling of Multiple Carbon Fillers in Liquid Crystal Polymer Composites for Fuel Cell Bipolar Plate Applications”, Journal of New Materials for Electrochemical Systems, Vol. 11, pp. 181-186, 2008.

R. A. Hauser, J. A. King, R. M. Pagel, and J. M. Keith,  “Effects of Carbon Fillers on the Thermal Conductivity of Highly Filled Liquid Crystal Polymer Based Resins”, Journal of Applied Polymer Science, Vol. 109, No. 4, pp. 2145-2155, August 2008. 

J. A. King, T. M. Tambling, J. M. Keith, A. J. Cole, and F. A. Morrison, “Synergistic Effects of Multiple Carbon Fillers on the Rheology of Liquid Crystal Polymer Based Resins”, Polymer Composites, Vol. 30, pp. 111-119, January 2009. 

J. A. King, R. L. Barton, R. A. Hauser, J. M. Keith, “Synergistic Effects of Carbon Fillers in Electrically and Thermally Conductive Liquid Crystal Polymer Based Resins”, Polymer Composites,  Vol. 29, No. 4, pp. 421-428, April 2008.

J. A. King, T. M. Tambling, F. A. Morrison, J. M. Keith, A. J. Cole, and R. M. Pagel,   “Effects of Carbon Fillers on the Rheology of Highly Filled Liquid Crystal Polymer Based Resins”, Journal of Applied Polymer Science, Vol.  108, No. 3, pp. 1646-1656, May 2008.  

J. A. King, J. M. Keith, O. L. Glenn, Jr., I. Miskioglu, A. J. Cole, S. R. McLaughlin, and R. M. Pagel, “Synergistic Effects of Carbon Fillers on Tensile and Flexural Properties in Liquid Crystal Polymer Based Resins”, Journal of Applied Polymer Science, Vol.  108, No. 3, pp. 1657-1666, May 2008.

J. A. King, R. A. Hauser, A. M. Tomson, I. M. Wescoat, and J. M. Keith,  “Synergistic Effects of Carbon Fillers in Thermally Conductive Liquid Crystal Polymer Based Resins”, Journal of Composite Materials, Vol.  42, No. 1, pp. 91-107, January 2008.

J. M. Keith, J. A. King,  P. W. Grant, A. J. Cole, B. M. Klett, and I. Miskioglu,  “Tensile Properties of Carbon- Filled Liquid Crystal Polymer Composites", Polymer Composites,  Vol. 29, No. 1, pp. 15-21, January 2008. 

R. L. Barton, J. M. Keith, and J. A. King, “Electrical Conductivity Model Evaluation of Carbon Fiber Filled Liquid Crystal Polymer Composites”, Journal of Applied Polymer Science Composites, Vol.  106, No. 4, pp. 2456-2462, November 2007.

R. L. Barton, J. M. Keith, and J. A. King, “Development and Modeling of Electrically Conductive Carbon Filled Liquid Crystal Polymer Composites for Fuel Cell Bipolar Plate Applications”, Journal of New Materials for Electrochemical Systems, Vol. 10, pp. 225-229, 2007.

J. M. Keith, J. A. King, K. M. Lenhart, and B. E. Zimny, “Thermal Conductivity Models for Carbon/Liquid Crystal Polymer Composites”, Journal of Applied Polymer Science Composites, Vol.  105, No. 6, pp. 3309-3316, September 2007.

E. Kunen, J. M. Keith,  J. A. King,  P. W. Grant, and F. A. Morrison,  “FEM Calculations of Capillary Rheometer Flow for Carbon Filled Liquid Crystal Polymer Composites", Journal of Applied Polymer Science, Vol. 106, No. 1, pp. 433-438. 2007.  

J. A. King, J. M. Keith, R. C. Smith, and F. A. Morrison, “Electrical Conductivity and Rheology of Carbon Fiber/Liquid Crystal Polymer Composites”, Polymer Composites, Vol. 28, No. 2, pp. 168-174, April 2007.

J. A. King, I. Miskioglu, D. Wright-Charlesworth, and C. Van Karsen, “Nano-Scratch Testing of Short Carbon Fiber Composites to Assess Fiber Adhesion”, Journal of Applied Polymer Science, Vol. 103, No. 1, pp. 328-335, January 2007.

J. M. Keith, J. A. King, M. G. Miller, and A. M. Tomson, “Thermal Conductivity of Carbon Fiber/Liquid Crystal Polymer Composites”, Journal of Applied Polymer Science, Vol. 102, No. 6, pp. 5456-5462, December 2006.

J. M. Keith, J. A. King, M. G. Miller, and A. M. Tomson, “Thermal Conductivity of Carbon Fiber/Liquid Crystal Polymer Composites”, Journal of Applied Polymer Science, Vol. 102, No. 6, pp. 5456-5462, December 2006.

J. M. Keith, J. A. King,  and R. L. Barton, “Electrical Conductivity Modeling of Carbon-Filled Liquid Crystal Polymer Composites", Journal of Applied Polymer Science, Vol. 102, No. 4, pp. 3293-3300, November 2006.

J. A. King, F. A. Morrison, J. M. Keith, M. G. Miller, R. C. Smith, M. Cruz, A. M. Neuhalfen, and R. L. Barton, “Electrical Conductivity and Rheology of Carbon -Filled Liquid Crystal Polymer Composites”, Journal of Applied Polymer Science, Vol. 101, No. 4, pp. 2680-2688, August 2006.

M. G. Miller, J. M. Keith,  J. A. King,  B. J. Edwards, N. Klinkenberg, and D. A. Schiraldi,  “Measuring Thermal Conductivities of Anisotropic Synthetic Graphite-Liquid Crystal Polymer Composites", Polymer Composites,  Vol. 27, No. 4, pp. 388-394, August 2006. 

J. M. Keith, C. D. Hingst, M. G. Miller, J. A. King, and R. A. Hauser, "Measuring and Predicting In-Plane Thermal Conductivity of Carbon-Filled Nylon 6,6 Polymer Composites",  Polymer Composites, Vol. 27, No. 1, pp. 1-7, February 2006. 

J. A. King, M. G. Miller, R. L. Barton, J. M. Keith, R. A. Hauser, K. R. Peterson, and L. L. Sutter,  “Thermal and Electrical Conductivity of Carbon- Filled Liquid Crystal Polymer Composites”, Journal of Applied Polymer Science, Vol. 99, No. 4, pp. 1552-1558, February 2006. 

M. G. Miller, J. M. Keith, J. A. King, R. A. Hauser, and A. M. Moran, "Comparison of Guarded Heat Flow and Transient Plane Source Methods of Carbon -Filled Nylon 6,6 Composites: Experiments and Modeling",  Journal of Applied Polymer Science, Vol. 99, No. 5, pp. 2144-2151, March 2006. 

J. M. Keith, N. B. Janda, J. A. King, W. F. Perger, and T. J. Oxby, "A Shielding Effectiveness Density Theory for  Carbon Fiber/Nylon 6,6 Composites",  Polymer Composites, Vol. 26, No. 5, pp. 671-678, 2005.

N. B. Janda, J. M. Keith, J. A. King, W. F. Perger, and T. J. Oxby, "Shielding Effectiveness Modeling of Carbon Fiber/Nylon 6,6 Composites",  Journal of Applied Polymer Science, Vol. 96, pp. 62-69, 2005.

J. A. Heiser, J. A. King, J. P. Konell, and L. L. Sutter,  “Electrical Conductivity of Carbon Filled Nylon 6,6”, Advances in Polymer Technology, Vol. 23, No. 2, pp. 135-146, 2004.

J. A. Heiser, J. A. King,  J. P. Konell, and L. L. Sutter,  “Shielding Effectiveness of Carbon Filled Nylon 6,6”, Polymer Composites, Vol. 25, No. 4, pp. 407-416, 2004. 

J. A. Heiser and J. A. King, “Thermally Conductive Carbon Filled Nylon 6,6", Polymer Composites, Vol. 25, No. 2, pp. 186-193, 2004.

J. A. Heiser, J. A. King, J. P. Konell, I. Miskioglu, and L. L. Sutter, “Tensile and Impact Properties of Carbon Filled Nylon 6,6 Based Resins”, Journal of Applied Polymer Science, Vol. 91, 2004, pp. 2881-2893. 

J. P. Konell, J. A. King, and I. Miskioglu, "Synergistic Effects of Carbon Fillers on Tensile and Impact Properties in Nylon 6,6 and Polycarbonate Based Resins", Polymer Composites, Vol. 25, No. 2, pp. 172-185, 2004.

J. P. Konell, J. A. King, and I. Miskioglu, “Tensile Modulus Modeling of Carbon Filled Nylon 6,6 and Polycarbonate Based Resins”, Journal of Applied Polymer Science, Vol. 90, 2003, pp. 1716-1728.

K. S. Torrey, W. A. Yrjana, and J. A. King, "Effect of Thermally Conductive Fillers on the Internal Bond Strength of Strandboard", Forest Products Journal, November/December 2003, Vol. 53, No. 11/12, pp. 74-80.   

Q. J. Krueger, and J. A. King,  “Synergistic Effects of Carbon Fillers on Shielding Effectiveness in Conductive Nylon 6,6 and Polycarbonate Based Resins”, Advances in Polymer Technology, Vol. 22, No. 2, pp. 96-111, 2003.   

E. H. Weber,  M. L. Clingerman, and J. A. King, “Thermally Conductive Nylon 6,6 and Polycarbonate Based Resin. Part 1: Synergistic Effects of Carbon Fillers”, Journal of Applied Polymer Science,  Vol. 88, pp. 112-122, 2003.

E. H. Weber,  M. L. Clingerman, and J. A. King, “Thermally Conductive Nylon 6,6 and Polycarbonate Based Resin. Part 2: Modelling”, Journal of Applied Polymer Science,  Vol. 88, pp. 123-130, 2003.

M. L. Clingerman, E. H. Weber, J. A. King, and K. H. Schulz, “Development of an Additive Equation for Predicting the Electrical Conductivity of Carbon- Filled Composites”, Journal of Applied Polymer Science,  Vol. 88, 2003, pp. 2280-2299.

M. L. Clingerman, E. H. Weber, J. A. King, and K. H. Schulz, “Synergistic Effects of Carbon Fillers in Electrically Conductive Nylon 6,6 and Polycarbonate Based Resins”, Polymer Composites, October 2002, Vol. 23, No. 5, pp. 911-924.

M. L. Clingerman, J. A. King,  K. H. Schulz,  and J. D. Meyers,  “Evaluation of Electrical Conductivity Models for Conductive Polymer Composites”, Journal of Applied Polymer Science,  Vol. 83, 2002, pp. 1341-1356.

J. A. King, K. W. Tucker, J. D. Meyers, E. H. Weber,  M. L. Clingerman, and K. R. Ambrosius,  “Factorial Design Approach Applied to Electrically and Thermally Conductive Nylon 6,6”, Polymer   Composites , February 2001, Vol. 22, No. 1, pp. 142-154.

J. A. King, K. W. Tucker,  B. D. Vogt, E. H. Weber, and C. Quan, “Conductive High   Temperature Nylon”, Journal of Composite Materials, December 2000, Vol. 34,  No. 24, pp. 2038-2060. 

J. A. King, K. W. Tucker, B. D. Vogt,  E. H. Weber,  and C. Quan, "Electrically and Thermally Conductive Nylon 6,6", Polymer Composites, October 1999,Vol 20, No. 5, pp. 643-654.

 

Proceedings and Presentations

D.  Lopez Gaxiola, M. Jubinski, J. M. Keith,  J. A. King, I. Miskioglu, “Tensile and Flexural Properties in Carbon Filled Polypropylene Based Resins”, American Institute of Chemical Engineers Annual Meeting, November 7-12, 2010, Salt Lake City, UT.

 M. E. Mullins, J. A. King, T. N. Rogers, J. M. Keith, B. Cornilsen, J. Allen, R. Gilbert, and J. Holles, “Center for Fundamental and Applied Research in Nanostructured and Lightweight Materials”, Department of Energy 2010 Hydrogen Program Merit Review, June 8, 2010, Washington, DC.  

 M. D. Via, J. A. King, I. Miskioglu, and G. R. Bogucki, “Electrical, Thermal, and Tensile Behavior of Carbon Nanotube/Polycarbonate Composites”, Proceedings of the Society of Plastics Engineers Annual Technical Conference, May 16-20, 2010, Orlando, FL.  

 M. D. Via,  J. A. King, F. A. Morrison, J. M. Keith, “Electrical Conductivity and Rheology of Carbon-Filled Polypropylene –Based Resins”, 81st Annual Meeting of the Society of Rheology,  October 18-22, 2009, Madison, WI.

 J. M. Keith,  J. A. King, R. L. Barton Carter, R. A. Hauser Wroblewski, and D.  Lopez Gaxiola, “Electrical Conductivity of Carbon Filled Liquid Crystal Polymer Composites for Fuel Cell Bipolar Plate Applications”, American Institute of Chemical Engineers Annual Meeting, November 9-13, 2009, Nashville, TN.

M. E. Mullins, J. A. King, T. N. Rogers, J. M. Keith, B. Cornilsen, J. Allen, R. Gilbert, and J. Holles, “Center for Fundamental and Applied Research in Nanostructured and Lightweight Materials”, Department of Energy 2009 Hydrogen Program Merit Review, May 18, 2009, Arlington, VA.

 R. A. Hauser, J. A. King, J. M. Keith, I. M. Wescoat, and R. M. Pagel, “Factorial Design of Thermally Conductive Composite Materials for Fuel Cell Bipolar Plate Applications”, American Institute of Chemical Engineers Annual Meeting, November 16-21,2008, Philadelphia, PA.

 W. Li, D. Meng, J. A. King, and J. M. Keith, “Fuel Cell Materials Research at Michigan Technological University”, ABET & CONNECT 2008, October 10, 2008, Detroit, MI.

 Agbolade A. Ajenifujah, and J. A. King, “The Development of Highly Conductive Carbon Filled Resins for Fuel Cell Bipolar Plate Applications”, Michigan College/University Partnership Program at Michigan Technological University, June 2008, Houghton, MI.

J. A. King, J. M. Keith, E. S. Steigerwalt, “GOALI: Development and Modeling of Highly Conductive Carbon Filled Thermoplastic Resins for Fuel Cell Bipolar Plate Applications”, National Science Foundation CMMI Grantees and Research Conference, January 7-10, 2008, Knoxville, TN. Also presented by J. A. King.

J. M. Keith, F. A. Morrison, and J. A. King, “FEM Using Comsol: Applications for Fuel Cells”, Proceedings of the American Institute of Chemical Engineers Annual Meeting, November 2007, Salt Lake City, UT. Also presented by J. M. Keith.

J. M. Keith,  J. A. King, F. A. Morrison, T. M. Tambling, E. Kunen, R. C. Smith, A. J. Cole, and P. W. Grant,  “ Rheological Measurements and Modeling of Carbon Filled Liquid Crystal Polymer Composites”, Proceedings of the American Institute of Chemical Engineers Annual Meeting, November 2007, Salt Lake City, UT. Also presented by J. M.Keith.

J. M. Keith, F. A. Morrison, and J. A. King, “Finite Element Method for Fuel Cell Fundamentals in the Undergraduate Transport Courses", Proceedings of the American Society of Engineering Education Annual Meeting, June 2007, Honolulu, HI, in press. Also presented by J. M. Keith.

R. A. Hauser, J. A. King, J. M. Keith, R. L. Barton, and M. G. Miller, “Thermal and Electrical Conductivity of Carbon/Liquid Crystal Polymer Composites for Fuel Cell Bipolar Plates", Proceedings of the Society of Plastics Engineering Annual Technical Conference, pp. 230-234, May 6-11, 2007, Cincinnati, OH. Also presented by R. A. Hauser.

A. M. Tomson, J. M. Keith, J. A. King, and M. G. Miller, “Thermal Conductivity of Carbon Fiber/Liquid Crystal Polymer Composites”, American Institute of Chemical Engineers Annual Meeting, November 11-17, 2006,  San Francisco, CA. Also presented by A. M. Tomson.

J. M. Keith, M. G. Miller, K. C. Opella, J. A. King, J. Meldrum, C. Green, G. Gwaltney, and S. Bradley, “Engineering Education in Alternative Energy", Proceedings of the American Society of Engineering Education Annual Meeting, June 2006, Chicago, IL. Also presented by J. M. Keith.

J. A. King, J. M. Keith, and E. S. Steigerwalt, “GOALI: Development and Modeling of Highly Conductive Carbon Filled Thermoplastic Resins for Fuel Cell Bipolar Plate Applications”, National Science Foundation Design, Service and Manufacturing Grantees and Research Conference, July 24-27, 2006, St. Louis, MO. Also presented by J. A. King.

R. L. Barton, J. M. Keith, and J. A. King, “Development and Modeling of Electrically Conductive Carbon Filled Liquid Crystal Polymer Composites for Fuel Cell Bipolar Plate Applications”, Proceedings of the New Materials for Electrochemical Systems Conference, Paper No. NM06-13, July 2006, Montreal (QC), Canada. Also presented by R. L. Barton.

R. L. Barton, J. M. Keith, and J. A. King, “Development of Electrically Conductive Models with Respect to the Transition to a Hydrogen Economy and Public Policy”, 2006 National Science Foundation IGERT Project Meeting, May 14-16, 2006, Arlington, VA. Also presented by R. L. Barton.

M.G. Miller, J. M. Keith, and J. A. King, “Graphite Filled Liquid Crystal Polymer Composites for Fuel Cell Bipolar Plates”, American Institute of Chemical Engineers Annual Meeting, October 30-November 4, 2005, Cincinnati, OH.  Also presented by M. G. Miller.

M. L. Clingerman,  J. P. Konell,  E. H. Weber,  J. A. King,  and K. H. Schulz,  “Comparison of Electrical, Thermal, and Mechanical Properties of Carbon Filled Resins”, Proceedings of the Society of Plastics Engineers Annual Technical Conference, May  2001, pp. 1364-1368, Dallas, TX.  Also presented by M. L. Clingerman.

J. A. King, E. H. Weber, and M. L. Clingerman, “Factorial Design Approach Applied to Electrically Conductive Nylon 6,6”, Proceedings of the Society of Plastics Engineers Annual Technical Conference, May 7-11, 2000,  pp. 1423-1426, Orlando, FL. Also presented by J. A. King.

T. E. Defnet, R. M. Essiambre, M. L. Clingerman, E. H. Weber, and J. A. King, Synergistic Effect of Four Different Carbon Fillers in Conductive Resins: Electrical Conductivity Results"; Proceedings of the American Institute of Chemical Engineers National Meeting, Los Angeles, CA; November 12-17, 2000. Also presented by T. E. Defnet.

R. M. Essiambre,  T. E. Defnet, M. L. Clingerman, and J. A. King,  "Synergistic Effect of Four Different Carbon Fillers in Conductive Resins: Thermal Conductivity Results"; Proceedings of the American Institute of Chemical Engineers, Los Angeles, CA; November 12-17, 2000. Also presented by R. M. Essiambre.

M. L. Clingerman, J. A. King, K. H. Schulz, and J. D. Meyers, "Evaluation of Electrical Conductivity Modelling for Conductive Composites"; Proceedings of the American Institute of Chemical Engineers National Meeting, Los Angeles, CA; November 12-17, 2000. Also presented by M. L. Clingerman.

J. A. King, "Determination and Modelling of Synergistic Effects of Carbon Based Conductive Fillers for Electrically and Thermally Conductive Resins", National Science Foundation Design & Manufacturing Research Conference, January 3-6, 2000, Vancouver, British Columbia. Also presented by J. A. King.

J. A. King, K. W. Tucker, J. D. Meyers, M. L. Clingerman, E. H. Weber, K. R. Ambrosius, and K. H. Schulz, "Factorial Design Approach Applied to Thermally and Electrically Conductive Nylon 6,6", Proceedings of the American Institute of Chemical Engineers Annual Meeting, Oct 31- Nov 5, 1999, Dallas, TX. Also presented by J. A. King.

M. L. Clingerman,  K. H. Schulz, and J. A. King, "Digital Image Analysis of Conductive Elements in a Nylon 6,6 Based Conductive Resins."; Proceedings of the American Institute of Chemical Engineer National Meeting, Oct 31-Nov 5, 1999, Dallas, TX. Also presented by M. L. Clingerman.

R. L. Fitzgerald,  J. D. Meyers, J. A. King, T. J. Van Dam,  M. A. Cleven, and M. Q. Simmons, "Carbon Fiber Modified Asphalt Delivery System and Pre-forms", Proceedings of the American Institute of Chemical Engineers Annual Meeting, October 31- November 5, 1999, Dallas, TX. Also presented by R. L. Fitzgerald.

E. H. Weber, J. A. King, and M. L. Clingerman, "A Study of the Resin Rich Surface Layer and Effect on Electrical and Thermal Properties in Nylon 6,6/Carbon Filler Composites"; Proceedings of the American Institute of Chemical Engineers National Meeting, Oct 31-Nov 5, 1999, Dallas, TX. Also presented by E. H. Weber.

J. A. King, M. L. Clingerman, and E. H. Weber, "Development of Conductive Nylon 6,6 and High Temperature Nylon", Proceedings of the 24th Biennial Conference on Carbon, Charleston, SC; pp. 196-197, July 1999. Also presented by J. A. King.

M. L. Clingerman, E. H. Weber, K. H. Schulz, and J. A. King, "Tensile, Thermal, and Electrical Properties of Nylon 6,6 Based Conductive Resins", Proceedings of the 24th Biennial Conference on Carbon, Charleston, SC; pp. 262-263, July 1999. Also presented by M. L. Clingerman and E. H. Weber.

J. A. King, E. H. Weber, M. L. Clingerman, and B. D. Vogt, "Conductive Nylon 6,6 and High Temperature Nylon", Proceedings of the Society of Plastics Engineers ANTEC, New York, NY, May 2-6, 1999. Also presented by J. A. King.

M. L. Clingerman, E. H. Weber, J. A. King, and K. H. Schulz, "Analytical Methods for the Characterization of Conductive Plastics,"; Proceedings of the American Institute of Chemical Engineers National Meeting, November 15-20, 1998, Miami Beach, FL. Also presented by M. L. Clingerman.

J. A. King, E. H. Weber, and B. D. Vogt, “Development of Thermally and Electrically Conductive Nylons”, American Institute of Chemical Engineers Annual Meeting, November 15-20, 1998, Miami Beach, FL. Also presented by J. A. King.

B. D. Vogt  and J. A. King, “Development of Thermally and Electrically Conductive Nylons”, North Central Regional American Institute of Chemical Engineers Student Conference, March 5, 1998. Also presented by B. D. Vogt.

 

Patents

L. M. Matuana and J. A. King, “ Method of Making Wood-Based Composite Board”, U. S. Patent No. 6,702,969 B2, Date Issued = March 9, 2004.  

L. M. Matuana and J. A. King, “Veneer-Based Product and  Method of Manufacture”,  U.S. Patent No. 6,589,655 B2: Date of Patent = July 8, 2003.